Date:         Mon, 24 Nov 2014 19:15:09 -0800
Reply-To:     Don Hanson <dhanson928@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Don Hanson <dhanson928@GMAIL.COM>
Subject:      Re: Securing table
Comments: To: "Chris S." <szpejankowski@gmail.com>
In-Reply-To:  <1665F28F-FE36-40BC-B700-6C65D590D322@gmail.com>
Content-Type: text/plain; charset=UTF-8

I just lower mine down onto the cabinet.   I made mine with a fiddle that
keeps stuff from sliding off, like on a boat...I extended that fiddle below
the table a little, too and that just slips behind those hatchs, the lids
for the lower cabs...so when I go, I swing the table back against the
window and drop it, the fiddle goes behind the hatches and it
stays.....Mine is home made, so maybe the factory ones are different.  I
agree that clamp is ....  home depot...

On Mon, Nov 24, 2014 at 6:46 PM, Chris S. <szpejankowski@gmail.com> wrote:

> Bungee cord. Seriously.
>
> Chris.
>
> Wysłane z iPhone'a
>
> Dnia Nov 24, 2014 o godz. 12:29 Stan Shapiro <mail@STANSHAPIRO.COM>
> napisał(a):
>
> > Any suggestions on how to better secure/lock the table.   The two screw
> > knobs - one under the table, and the one securing the pole-don't seem to
> be
> > doing the job to lock the table in place, without really tightening them,
> > and then still they are slightly loose.
> >
> >
> >
> > Thanks
> >
> > stan
> >
> > 90 Westy
>