Date:         Mon, 24 Nov 2014 22:44:56 -0500
Reply-To:     Karl Mullendore <tdiguru@WESTYVENTURES.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Karl Mullendore <tdiguru@WESTYVENTURES.COM>
Subject:      Re: Securing table

In a '90, if the inner locking pieces are still inside the brackets along
with stock knobs, there is only one reason they are holding: lubricate the
knob/bolt threads (in my best Scott Foss voice)! I have never had a problem
with '86-on tables staying securely in place. If that still isn't quite
enough, remove the locking pieces from the brackets and rough up the surface
with 40-grit sandpaper. That should give some bite.

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.