Date:         Wed, 26 Nov 2014 12:45:31 -0800
Reply-To:     Michael Magnani <mfmagnani@SBCGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Michael Magnani <mfmagnani@SBCGLOBAL.NET>
Subject:      Re: Removing Heater Cover Plate
Comments: To: Dan N <dn92610@GMAIL.COM>
In-Reply-To:  <CAFdLW6kuNUfbMt-DaQ13B8XuhBnMDztG23XCkH8A4aOhXv_Xcg@mail.gmail.com>
Content-Type: text/plain; charset=us-ascii

Great Success!
Thanks Dan,
The left side came out easily enough but I had to drill out a pop rivet that was attached to a little plastic clip on the right side. Now I have the access I need.
Mike M


On Wednesday, November 26, 2014 11:52 AM, Dan N <dn92610@GMAIL.COM> wrote:



the one on the front... right at the shifter?

just pull it out straight... yes.. it's a bit scary but it's only way to
take it out

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.