NOID light? How do I make one of these? Mike M
On Saturday, November 29, 2014 4:17 PM, "SDF ( aka ;jim lahey' - Scott )" <scottdaniel@TURBOVANS.COM> wrote:
can't say it enough.. it is just SO HANDY to have a simple, small, and not expensive ...............NOID light. that way ..in 10 seconds you can find out if the ECU is triggering the injectors .. which goes a long way toward identifying what is going on. ..whether you get flashes while cranking or not. or in a rare case dim or intermittant flashes ( saw that on a Subaru conversion I bought once....in the end it was a matter of battery cable sizes. quite odd, but that was it. )
On 11/29/2014 1:39 PM, Steve Williams wrote: > On 11/29/2014 3:15 PM, Raymond Markett wrote: >> Did you check inside the distributor cap for condensation? > > Thanks for the suggestion. > > I just did that. No obvious condensation. I wiped the inside of the > distributor cap with a dry cloth. No change. > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.