Date:         Sun, 30 Nov 2014 10:37:06 -0800
Reply-To:     Rob <vwrobb@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Rob <vwrobb@GMAIL.COM>
Subject:      Re: Won't Start in St. Helena, Napa County
Comments: To: OlRivrRat <OlRivrRat@COMCAST.NET>
In-Reply-To:  <4A24F73A-6951-4968-9C7C-E123C2A16258@comcast.net>
Content-Type: text/plain; charset="us-ascii"; format=flowed

At one point I needed to see if the injectors were getting juice &
did a search. On some off road forum I found the recommendation for a
light bulb, I believe a side marker bulb. It was almost flat & the
two prongs on the bottom were wire that could be bent out and
inserted into the injector plug.
I plugged it in & had someone crank the engine (a remote start is a
huge help, I bought one after this) and I did see the filament glow.
I do not recall the specific bulb number but it's value were the
wires could be bent to fit into the injector plug.

Rob
vwrobb@gmail.com



At  11/30/2014 09:35 AM, OlRivrRat wrote:
>         The Prob' for Me is that I have an ExtremelyDifficult time
> trying to Justify
>
>buying a Whole Set of Somethings that I only need 1 of ~ That takes away the
>
>"Simple" for Me ~ I have a HugeAversion to being Wasteful ~ It's an
>Affliction ~
>
>I know that the Sets are QuiteEasilyAvailable & Cheap ~ BUT ~ DangIt ~
>
>                                                         ORR ~ DeanB
>
>
>On 30 Nov , 2014, at 1:31 AM, SDF ( aka ;jim lahey' - Scott ) wrote:
>
> > you go to a parts store and buy one.
> >
> > if they don't know what one is ..
> > they don't know their parts business.
> > it's a standard diagnostic tool..
> >
> > google it.
> >
> >
> > On 11/29/2014 5:15 PM, Michael Magnani wrote:
> >> NOID light? How do I make one of these?
> >> Mike M
> >>