At 08:39 AM 12/12/2014, T Collins wrote: >So what is the difference? >I have an 85 tin top. I just got close out announcement on parts from rock >auto and I see a clutch master cylinder (What is that??) There are two hydraulic systems in the Vanagon, clutch and brake. Each one has a master cylinder connected to the pedal (the brake master is effectively two in one assembly) and one or more slave cylinders at the operating end; one for the clutch and four for the brakes. The front brake ones aren't separate assemblies, they're the piston portions of the brake calipers. Both systems draw fluid from the same reservoir, but the brakes take their feed from the bottom and the clutch from the side. That way the brake system will always be the last to lose fluid in case of a leak. The reservoir is actually mounted on top of the brake master, and the clutch master is fed by a hose. 'Zat help? Yours, David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.