Date:         Tue, 9 Dec 2014 13:33:27 -0700
Reply-To:     Karl Wolz <wolzphoto@Q.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Karl Wolz <wolzphoto@Q.COM>
Subject:      Re: AT question
Comments: To: Jeff Schwaia <vw.doka@GMAIL.COM>
In-Reply-To:  <007701d013e3$3fd6f3a0$bf84dae0$@gmail.com>
Content-Type: text/plain; charset=us-ascii

If you need to get by for a while, add a capful of brake fluid (DOT 3 or 4) to the tranny fluid. Brake fluid tends to soften and rejuvenate rubber seals. Don't add much all at once; just a capful at a time. 

Karl Wolz
Sent from my electronic umbilicus

> On Dec 9, 2014, at 12:06 PM, Jeff Schwaia <vw.doka@GMAIL.COM> wrote:
> 
> Hey Larry, 
> 
> Let me guess... around 200k miles on the transmission?   If so, the seals and pistons in the transmission are worn and will not start working properly until they heat up and expand to create a better seal.  Very common...
> 
> Cheers, 
> 
> Jeff
> 
> 
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Larry Alofs
> Sent: Tuesday, December 09, 2014 8:55 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: AT question
> 
> Volks,
>  I have been working on a rather nice '91 GL, soon to be for sale.  The last issue is the transmission.  If the van has not been driven for a couple of days, the transmission is reluctant to get going at first.  When I shift into drive or reverse I can feel it engage, but the vehicle moves very little until I run it at 2500 rpm or so for about 30 seconds.
>  Once it starts to pull, it works fine for the rest of the day, shifting smoothly at appropriate speeds, etc.
> I have tried a dose of Seafoam followed by a fluid and screen change.  This approach has worked well for me on other types of vehicles with the same problem, but not this time.
> 
> Can anyone offer a considered opinion about the cause of this problem?
> Will I have to go into the trans itself, or is there some hope of a remedy by changing the torque convertor or governor or cleaning the valve body?
> 
> Larry A.
> W. Michigan