Date: | Thu, 18 Dec 2014 21:01:41 -0800 |
Reply-To: | Alistair Bell <albell@SHAW.CA> |
Sender: | Vanagon Mailing List <vanagon@gerry.vanagon.com> |
From: | Alistair Bell <albell@SHAW.CA> |
Subject: | Re: Loose stuff inside vans. |
|
In-Reply-To: | <EE1EFE74-1D62-49A7-ABD3-C1F12B1DE0C2@gmail.com> |
Content-Type: | text/plain; charset=us-ascii |
I won't be making one, as much as like the idea. I have a westy cabinet in the way :)
Alistair
> On Dec 18, 2014, at 8:40 PM, Tony Collins <tonycollin@GMAIL.COM> wrote:
>
> Like I mentioned earlier. I have seen these in jettas and passats. Our Toyota highlander has one too. I'm sure that we can start by doing some measuring. I'll see what the Toyotas size is and report back by Saturday. Obviously we would have to mod attachment points if using anything else than vanagon specific parts but I don't think is impossible. Hell, a piece of plywood wood make a box back there with the right hardware if it came down to it. I wonder what felder and bell industries will think of?
>
> T.
>
> Sent from my iPod
>
>> On Dec 18, 2014, at 11:12 PM, Stuart MacMillan <stuartmacm@GMAIL.COM> wrote:
>>
>> Interesting, thanks! The parts are made of unobtanium anyway. I think the
>> cover from a Subaru wagon could be adapted for a Westy. I'll work on that.
>>
>> Stuart
>>
>> -----Original Message-----
>> From: Alistair Bell [mailto:albell@shaw.ca]
>> Sent: Thursday, December 18, 2014 7:38 PM
>> To: Stuart MacMillan
>> Cc: <vanagon@GERRY.VANAGON.COM>
>> Subject: Re: Loose stuff inside vans.
>>
>> Here you go
>>
>> http://shufti.wordpress.com/2014/12/18/vanagon-behind-the-rear-seat-sliding-
>> cover/
>>
>> Did I mention it's in German? ;)
>>
>> Alistair
>>
>>
>>
>>> On Dec 18, 2014, at 5:19 PM, Stuart MacMillan <stuartmacm@gmail.com>
>> wrote:
>>>
>>> Definitely post it on your blog and send the link!
>>>
>>> Stuart
>>>
>>> -----Original Message-----
>>> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On
>>> Behalf Of Alistair Bell
>>> Sent: Thursday, December 18, 2014 5:12 PM
>>> To: vanagon@GERRY.VANAGON.COM
>>> Subject: Re: Loose stuff inside vans.
>>>
>>> I can send, or post on my blog, the parts diagram for sliding cover.
>>>
>>> Alistair
>>>
>>>
>>>
>>>> On Dec 18, 2014, at 11:33 AM, Jim Felder <jim.felder@GMAIL.COM> wrote:
>>>>
>>>> That's a well-known urban legend, but the advice is good just the
>>>> same. I would like to know more about the optional folding-sliding
>>>> rear cover. Not that it would a lot for a transmission.
>>>>
>>>> In my westy, I carry a tool bag full of kayak tie-down straps for
>>>> that purpose. When I carry something heavy, I at least tether it with
>>>> one of those straps to the front table leg so it can't go flying around.
>>>> Some good tie-downs in the floor wouldn't hurt, say a recessed D-ring
>>>> in
>>> each corner.
>>>> I have that on a wooden trailer and it's pretty handy, doesn't get in
>>>> the way.
>>>>
>>>> Jim
>>>>
>>>> He had
>>>>
>>>>> worked for a rescue squad and told of the time a box of tissues on
>>>>> the back shelf of an old sedan had flown forward and cut the neck of
>>>>> a passenger such that they bled to death.
>>>
|