Are you trying to cut through the bolt where the trailing arm attaches to the body? Jim
> On Jan 20, 2015, at 12:26 PM, Neil N <musomuso@GMAIL.COM> wrote: > > FWIW, my angle grinder + 4.5" cut off wheel didn't seem to fit the > work area at inboard mounting bolt so I used a hacksaw. Surprisingly, > it cut through one end of bolt fairly easily. > > I don't know if a larger cut off wheel will fit my angle grinder but > would appreciate > methods and-or tool suggestions for cutting the inboard mounting bolt. > > Neil. > > >> On 1/17/15, Neil N <musomuso@gmail.com> wrote: >> >> Ya. It's rusty. > > -- > Neil n > > Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca> > > 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy> > > 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/> > > Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.