Guard off the grinder? If you have a compressor, then you can use a small air powered cut off tool. Like a mini grinder but smaller body. Alistair
> On Jan 20, 2015, at 6:48 PM, Neil N <musomuso@gmail.com> wrote: > > I'll double check but it appears my 4.5" grinder body will end up > hitting the portion of mount bracket sitting below the bushing. That > bracket being different than the outboard bracket. > > I'm using a 4.5" grinder > > I need a lift and more tools! ;) > >> On 1/20/15, Alistair Bell <albell@shaw.ca> wrote: >> >> Neil, >> >> Is it a case of the angle grinder body interfering with getting at the bolt >> or the disk itself? I keep small used disks around for tight spots. >> >> Alistair >> >> >> > > > -- > Neil n > > Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca> > > 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy> > > 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/> > > Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.