On 1/20/15, OlRivrRat <OlRivrRat@comcast.net> wrote: > The WasherThickness Won't Cause a Prob' ~ Just need to be sure that Washer > ID Matches the OD > > of the Step on the RubberBush' or the Alum'Bush if you use T3 ~ Maybe I missed a detail in a post here or it wasn't made, or I'm just thick in the head, (LOL) but I'm assuming the washer in question would be welded to face of subframe as per repair I did. Image: https://sites.google.com/site/tubaneil2/RadiusArmHoleFront.jpg (my welding has improved some since then. ha ha.) Are Miguel et al talking about welding a washer, or part of a washer, to ID of hole at frame? |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.