Yes. Each hole should be round. Two pics from my lower mileage '88 https://picasaweb.google.com/musomuso/FrontEndWork#5831878834778519618 I find it interesting to see the rust that happens at that area. On my '81, I repaired an out of round hole. When bushing replacement is needed, I'll know if the repair has held up, but I feel it was strong enough. damage etc. on the '81 with link to repair at page bottom: https://sites.google.com/site/tubaneil2/radiusarm
On 1/19/15, Miguel Pacheco <mundopacheco@gmail.com> wrote: > .... > Are they supposed to be perfectly round? The bible > only shows one illustration, in the Syncro section (40.26,) and it is > round.
-- Neil n Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca> 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy> 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/> Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.