Date:         Tue, 20 Jan 2015 19:46:53 -0800
Reply-To:     Alistair Bell <albell@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Alistair Bell <albell@SHAW.CA>
Subject:      Re: Tool Suggestion? Re: Rear Trailing Arm Replacement Fun!
Comments: To: Neil N <musomuso@gmail.com>
In-Reply-To:  <CAB2Rwfh7RKmBpCGbYT=RzMG0-UaQHM-YOPA2h4tt2Kf4LviFZA@mail.gmail.com>
Content-Type: text/plain; charset=us-ascii

I'm not suggesting you remove the guard, that would be dangerous. At work all the angle grinders ( big and small) have the guards removed, except the ones that have carbide toothed metal cutting blades ( the millers we call them). Removing the guard from a carbide toothed blade equipped grinder is completely, absolutely, dangerous. 

We just find that the guards get in the way too often. Yeah, it's unsafe and all that. Full face shields are used , and gloves of course.

Alistair






> On Jan 20, 2015, at 7:33 PM, Neil N <musomuso@gmail.com> wrote:
> 
> I don't know if the arbor OD is larger but I considered removing the
> guard and using a 5"
> wheel. But even with my protective mask on, no can do.   :)
> 
>> On 1/20/15, Alistair Bell <albell@shaw.ca> wrote:
>> 
>> Guard off the grinder?
> 
> 
> -- 
> Neil n
> 
> Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>
> 
> 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>
> 
> 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

> 
> Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>