hopefully someone didn't use loctite on it. try more penetrant... make sure u wipe the penetrant off the paintwork ASAP..some of that stuff can damage paint..
In a message dated 1/23/2015 5:59:49 P.M. Eastern Standard Time, dn92610@GMAIL.COM writes:
could you please help me on this issue... I try to remove the sliding door handle to replace the missing gasket.. I lift the panel, remove the screw... but the handle doesn't move at all... I tried BP blaster --> nope I put the screw back on half way and hit it with a hammer --> nope on my other van the handle just slide out easily... what's going on and what else to do? (without destroying anything) many thanks in advance... |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.