I have a whole box full, but shipping from Canada wouldn't be the cheapest. Did you pull the head? If so - you'll need the collapsible style replacement ones that are a bit dear. Jason On Sat, Feb 7, 2015 at 3:23 PM, John Rodgers <jrodgers113@gmail.com> wrote: > Finally got around to fixing my pushrod tube leak. Found there was a 4 inch > crack in one tube. Upon disassembly and removal of the push rods, I found > two of them bent. Probably accounts for the one cracked tube at least. On > the passenger side, as seen from the rear of the van, from back to front, > it was the 2nd and 4th push rod. > > The engine has run fine, but for the oil leak. But this has to be fixed. > Anyone have two or four pushrods from a junked 2.1 L that they care to > part with? Would be much appreciated. My van is down for the count as it > sits. > > Thanks, > > John > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.