Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2015, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 1 Feb 2015 20:47:12 -0500
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: Removing stuck O2 sensor
Comments: To: Stuart MacMillan <stuartmacm@GMAIL.COM>
In-Reply-To:  <007401d03e4f$ef2210b0$cd663210$@gmail.com>
Content-Type: text/plain; charset="us-ascii"

It's not the lift, but having the oxy acetylene torch and knowing how to use it. I last wasted money on the Map gas torch some 25 years ago. It is really limited to brazing soft materials. Need to get steel red hot fast, your need the real deal. Must be nice to live in an area where a shop will remove a catalyst. Without the cat you may not need the O2 sensor. The O2 sensor is there to make the cat do its job.

Dennis

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Stuart MacMillan Sent: Sunday, February 1, 2015 1:50 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Removing stuck O2 sensor

You can do that because you have a lift! I've given up. Tried MAP gas with an O2 sensor crow's foot tool and could only get it 1/8th turn. At least NAPA loans those tools, but 7/8" is too big, and rounded the corners.

If the treads are buggered, the shop can replace the cat with a pipe & bung, I don't need it.

Stuart

-----Original Message----- From: Karl Wolz [mailto:wolzphoto@q.com] Sent: Sunday, February 01, 2015 12:23 AM To: Stuart MacMillan Cc: vanagon@GERRY.VANAGON.COM Subject: Re: Removing stuck O2 sensor

I use a Stilson wrench and a four foot heavy pipe as a cheater.

Karl Wolz Sent from my electronic umbilicus

> On Jan 31, 2015, at 11:59 AM, Stuart MacMillan <stuartmacm@GMAIL.COM> wrote: > > Well, first attempts with a 22mm box wrench and heat have failed. > Should I break it off and use a regular 22mm socket? Get a 7/8" > special O2 sensor socket, which is slightly larger, so I can put a > long bar on it? Take it to > a muffler shop? > > > > Other ideas? > > > > Thanks! > > > > Stuart


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.