Date: Mon, 9 Feb 2015 13:49:05 -0800
Reply-To: Jeff Schwaia <vw.doka@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Jeff Schwaia <vw.doka@GMAIL.COM>
Subject: Re: 2.1 L push rods
In-Reply-To: <pui27a0sbt7fltlka37txmt0.1423518211285@email.android.com>
Content-Type: text/plain; charset="utf-8"
I have 100+ of them in a cardboard box here in the shop. I use about 5 a year for various projects and customer vans.
Used one just the other day… cut a 3” segment out of one the other day to splice some fuel hose. Perfect fit!
Cheers,
Jeff
From: Jeff Stewart [mailto:fonman4277@comcast.net]
Sent: Monday, February 09, 2015 1:44 PM
To: Jeff Schwaia; vanagon@GERRY.VANAGON.COM
Subject: Re: 2.1 L push rods
Lol, when I read that I thought " Wow, $40.00 each used? I've thrown away a few hundred dollars worth over years the years"
Sent from my Verizon Wireless 4G LTE smartphone
-------- Original message --------
From: Jeff Schwaia
Date:02/09/2015 4:11 PM (GMT-05:00)
To: vanagon@GERRY.VANAGON.COM <mailto:vanagon@GERRY.VANAGON.COM>
Subject: Re: 2.1 L push rods
Only $27 brand new from Van Café:
http://www.van-cafe.com/home/van/page_1685_716/new-push-rod.html
Cheers,
Jeff
-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of kenneth wilford (Van-Again)
Sent: Monday, February 09, 2015 6:09 AM
To: vanagon@GERRY.VANAGON.COM <mailto:vanagon@GERRY.VANAGON.COM>
Subject: Re: 2.1 L push rods
John, I have used ones in stock. I usually sell them for $40 each plus shipping them to you via priority mail shipping which is an additional $7 for as many as you may need. There some aftermarket ones listed out there but all of them I have purchased have been a different length than the stock waterboxer push rods. Just found out that they are the correct length for some of the aircooled Vanagon 2.0l engine, even though I thought those were the same as the bus AC push rods (live and learn).
Let me know if I can help you further.
Ken
On Sat, Feb 7, 2015 at 3:23 PM, John Rodgers <jrodgers113@gmail.com <mailto:jrodgers113@gmail.com> > wrote:
> Finally got around to fixing my pushrod tube leak. Found there was a 4
> inch crack in one tube. Upon disassembly and removal of the push rods,
> I found two of them bent. Probably accounts for the one cracked tube
> at least. On the passenger side, as seen from the rear of the van,
> from back to front, it was the 2nd and 4th push rod.
>
> The engine has run fine, but for the oil leak. But this has to be fixed.
> Anyone have two or four pushrods from a junked 2.1 L that they care
> to part with? Would be much appreciated. My van is down for the count
> as it sits.
>
> Thanks,
>
> John
>
--
Thanks,
Ken Wilford
John 3:16
www.vanagain.com <http://www.vanagain.com>