The bottom plate for your seat swivel is welded to the stock tracks. If you're careful, you can cut out the swivel bottom at the spot welds and your tracks should still be usable. In the meantime, you can sell your swivel for enough money to buy a new battery.
BenT sent from my electronic leash > On Feb 13, 2015, at 1:38 PM, Dennis Jowell <dennisjowell@GMAIL.COM> wrote: > > I wanted to remove the driver side swivel seat bracket to allow room for battery controls and a aux. fuse box. Do I have to purchase seat brackets that the seat will slide on? I see bolts/nuts to remove the actual swivel part but can the runners for,the seat come off? I saw other list members who have done this. Any thoughts of what I should do? > > Dennis > > > Dennis Jowell > Scotch Hollow Farm > Newbury, Vermont |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.