Date:         Fri, 27 Feb 2015 08:32:58 -0800
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: Why??? Many Dometic Pics and Tips
Comments: To: Dennis Haynes <d23haynes57@hotmail.com>
Content-Type: text/plain; charset=UTF-8

I recall separating the combustion box from pipes and partially
damaging the gaskets. I put the parts together and used a layer of red
RTV at outside edge flange to seal up the gaskets between exhaust and
intake pipes to combustion chamber. This held up for some time. There
is also a pair of half moon metal bits used in conjunction with the
big brass nut to hold the (exhaust?) pipes together.

Roger Sislers' page here

https://www.flickr.com/photos/werksforwagens/sets/72157594499353583/

has a ton of pics and info on the older 182A he resurrected. It should
show details on intake-exhaust pipes etc. Some of this info should
apply to the 182B.

On 2/27/15, Dennis Haynes <d23haynes57@hotmail.com> wrote:

> ..... Difficulty
> lighting and keeping it lighted are often signs of a leak somewhere. The
> combustion chamber needs be sealed at the bottom plate and often over looked
> is where the chamber meets the exhaust pipe. I have also seen the exhaust
> pipes rotted out with pin holes and stuff.
>
> Dennis
>
>


--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>