Date:         Thu, 26 Feb 2015 22:07:33 -0500
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: Squeaking front bushings
Comments: To: OlRivrRat <OlRivrRat@COMCAST.NET>
In-Reply-To:  <AE65DA55-EF36-4DC1-9F9A-10771AF7E1B3@comcast.net>
Content-Type: text/plain; charset="us-ascii"

If you inspect the new bushing carefully you will see the rubber piece
between the inner and outer sleeves creped and twisted. If only a few
thousand miles and a few months I would send it/them back as defective. Only
way parts suppliers-manufacturers know about problems is to get the
feedback.

Dennis


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
OlRivrRat
Sent: Thursday, February 26, 2015 9:00 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Squeaking front bushings

        My, Now 5000mi old, OEM Upper ControlArm Bush's started squawking a
While ago & I tried Spraying them,

ToNoAvail, with TriFlo IIRC ~ Then sometime in the last few weeks we had
some HeavyPrecip'Days & the Squawks

stopped but then returned in the DryDays that followed ~ So I figured I'd
try again ~ But this time I used CRC

HeavyDuty SiliconeSpray & it worked ~ Don't ask me why ~


ORR ~ DeanB

On 26 Feb , 2015, at 6:23 PM, Stuart MacMillan wrote:

> I've sprayed silicone once with no effect, so I'm going to keep at it
> a few more times!
>
> Stuart