Mobil 1 15w-50 5 quart jug often $25.88 at Walmart. Mobil 1 0w-40 European 4 quart jug the same or the Mobil 1 truck-Suv 5w-40 for those that want the Diesel stuff. They also usually have the Rotella T5 (blend) and T6 synthetic for even less. I have also been using the Mobil M1-205 oil filters. Shop on Amazon and e-bay for price. When I do exhaust I usually plan end up with the torch. This is a bit more fun after rust busters have been sprayed as they are combustible so the stuff has to be cleaned and burned off. The Go Westy Stainless pipes are interchangeable in pieces with the factory style exhaust. You can upgrade one piece at a time as needed. Their muffler and brackets are a great way to get better breathing, mount better, and reduce some weight. I do like better hardware though. Dennis
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of OlRivrRat Sent: Thursday, March 5, 2015 12:13 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: .9 bar oil pressure sender replacement Kevin Not that it is necessary, but I'll put a 2nd on what DH & KW have said & Add that if You have not already done so, You should Soak All the Nuts&Bolts that you are going to be removing on this project with PBBlaster &Or Zep45 Today & then HeatItUp ToOp'Temp &Then SoakAgain ~ &Also ~ The NextTime You change Your Oil, Save Yourself some UnnecessarilySpent $s & use Valvoline FullSynthetic Instead ~ http://www.valvoline.com/products/consumer-products/motor-oil/full-synthetic -motor-oil/ Redline is a GreatOil as are RoyalPurple & Ams but WayOverPriced & a Valvo' F'S'Oil will DoTheJob JustAsWell ~ There are Other Good F'S'Oils out there but I'm just fond of Valvo' ~ ORR ~ DeanB
On 5 Mar , 2015, at 8:50 AM, Kevin Duvernay wrote: > I'm swapping out my motor mounts tomorrow. While I'm there I'm also > going to replace the #2/4 header. If that goes smoothly, I've also got > a new water pump along with all new coolant pipes/gaskets and hoses > (its basically the last bits of my complete cooling system overhaul!) > > Anyways, I figured while I'm there doing all this I minus well toss in > a new high pressure oil sender (the grey one, .9 bar). What I'm > wondering is, is it possible to do this without loosing too much oil? > I JUST changed the oil out to some really expensive Redline synthetic > stuff, would hate to waste any of it... > > Also, anything else I should address while I'm back there? > > Kevin |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.