On Mar 8, 2015, at 8:17 PM, James <jk_eaton@HOTMAIL.COM> wrote: > Which seal are you replacing? The one that goes all the way around the door in one strip? The one that is on just the front of the door? Or the seals on the windows? Use this Bus Depot diagram to sort them out: http://www.busdepot.com/details/vanagonrubber/
I'm not doing all of the seals…just the felt channel "Top & Rear Of Door Window". http://www.busdepot.com/255837709. It sounds simple: Roll the window down Peel away old seal starting where it butts up at the back of the door Cleanup surface Check length and Re-install new seal Use some "body trim adhesive" to glue it back in place (if it was used in in the first place) When things sound too simple, I like to check if I've not done it before. I think I'll do it tonight! Thanks! Aaron |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.