Date:         Mon, 9 Mar 2015 09:30:48 -0700
Reply-To:     Aaron <a.robinson.lists@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Aaron <a.robinson.lists@GMAIL.COM>
Subject:      Re: Door seal replacement
In-Reply-To:  <BLU177-W3178663D0191322A1583E9E01B0@phx.gbl>
Content-Type: text/plain; charset=windows-1252

On Mar 8, 2015, at 8:17 PM, James <jk_eaton@HOTMAIL.COM> wrote:

> Which seal are you replacing?  The one that goes all the way around the door in one strip?  The one that is on just the front of the door?  Or the seals on the windows?  Use this Bus Depot diagram to sort them out:  http://www.busdepot.com/details/vanagonrubber/


I'm not doing all of the seals…just the felt channel "Top & Rear Of Door Window".  http://www.busdepot.com/255837709. 

It sounds simple: 
        Roll the window down
        Peel away old seal starting where it butts up at the back of the door
        Cleanup surface
        Check length and Re-install new seal 
        Use some "body trim adhesive" to glue it back in place (if it was used in in the first place) 

When things sound too simple, I like to check if I've not done it before. I think I'll do it tonight!

Thanks!
Aaron