Date:         Fri, 20 Mar 2015 10:50:18 -0700
Reply-To:     Stuart MacMillan <stuartmacm@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stuart MacMillan <stuartmacm@GMAIL.COM>
Subject:      Re: 110 VAC circuit breaker guard,
              was Re: Is anybody still on this list?
Comments: To: David Beierl <dbeierl@ATTGLOBAL.NET>
In-Reply-To:  <vanagon%2015031920262238@GERRY.VANAGON.COM>
Content-Type: text/plain; charset="us-ascii"

Not a bad idea.  I'm just afraid that something (firewood) or someone's foot
is going to break off that toggle soon. And there goes another $35.  I'm
thinking of making a guard out of a piece of 1/2 copper pipe and cap with a
hole drilled in it.  I'll paint it fluorescent red.

Stuart

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
David Beierl
Sent: Thursday, March 19, 2015 5:26 PM
To: vanagon@GERRY.VANAGON.COM
Subject: 110 VAC circuit breaker guard, was Re: Is anybody still on this
list?

At 08:54 PM 3/13/2015, Stuart MacMillan wrote:
>Thanks for the effort on the circuit breaker protector.  You can skip
>the knurling, just turn one on a lathe out of aluminum rod stock.  But
>I may be the only person on the planet who needs one!
>
>Stuart

I carved out two openings in the sides of my stock one on the '84 to allow
me to switch it off by hand if necessary without having to get a bent
paperclip behind it.

Yrs,
d