Date:         Wed, 18 Mar 2015 05:37:01 -0400
Reply-To:     phishman068@GMAIL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Craig Cowan <phishman068@GMAIL.COM>
Subject:      Re: How much oil?
Comments: To: "sailingfc @dslextreme.com" <sailingfc@DSLEXTREME.COM>
In-Reply-To:  <CAJ-pOobnK+4afMtDsZ9mTGWdhyy0YqVimVhH_7mPCYAV3rsSSg@mail.gmail.com>
Content-Type: text/plain; charset=us-ascii

I just did mine yesterday. It took about 4.2 quarts, give or take a bit (I was filling from a gallon jug). 
In order to reach that hard to reach level of just below full, 
I filled it full until fluid was overflowing, then removed my hose and jacked up the rear a bit. I let a completely random amount of juice out and then leveled it off and put the plug in. 

I have learned over the years that having that  level below full is key, but as to just how accurately "just below full" you need to be..... Well I don't even know how to measure!

"Just below full" is the level you seek. 

-craig 


> On Mar 18, 2015, at 1:05 AM, sailingfc @dslextreme.com <sailingfc@DSLEXTREME.COM> wrote:
> 
> So last weekend I changed the transaxle oil on my 87 Syncro for the first
> time.  Bentley says 4.7 quarts, but only 3.2 quarts if just draining and
> refilling.  And Bentley also mentions not to fill a 5 speed transaxle to
> ease shifting, but no mention about under filling for the Syncro transaxle.
> After putting in 3 quarts, I can't feel any oil inside the fill hole.  I
> put in a fourth quart and can "feel" the oil about a half inch below the
> fill hole.  I'm guessing I could put another half quart in.  So how much
> should I really put in?
> 
> -Dick-
> 87 Syncro (Blaze)