Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2015, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 18 Mar 2015 07:59:10 -0500
Reply-To:     adam butler <acbutler.dandy@ICLOUD.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         adam butler <acbutler.dandy@ICLOUD.COM>
Subject:      Re: Shop building
In-Reply-To:  <5508612b.61c7420a.246a.fffff6d2@mx.google.com>
Content-type: text/plain; charset=us-ascii

Cheers,

Adam Butler > On Mar 17, 2015, at 12:15 PM, Jeff <vw.doka@GMAIL.COM> wrote: > > You do not need a "beefy" two post lift. Most run-of-the-mill lifts have a > capacity of 9000 lbs. Plenty for any Vanagon. > > What you do want is a floor plate lift. That way you can use the full > height of the lift and not be limited by the overhead bar. > > For Vanagons, I prefer a symmetrical lift (vehicle is centered on lift). > > As for concrete, two post lifts generally require 6" of high density > concrete (3000 psi or more). > > Setting up a two post lift is pretty straightforward. All you need is a > good rotary hammer drill, chalk and a tape measure. No need for a > professional. > > Hope that helps. > > Cheers, > > Jeff > > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > Stuart MacMillan > Sent: Tuesday, March 17, 2015 9:16 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: Shop building > > Rotary is a brand: http://www.rotarylift.com/ Two post lifts need > substantial anchor footings deep into the ground for installation (this is > earthquake country), you don't just bolt them to a slab. So, if you go that > route, get the instructions for installation from the manufacturer so you > can pour the footing before pouring the slab. > > Four post lifts sit on the floor and can be moved with casters, giving you > more garage flexibility, but somewhat poorer access to the underside. You > need a house jack for brake & suspension work, and a crossbar is handy for > jacking and jack stands for supporting the end of the vehicle you are > working on when the wheels are off. > > You'd need a really beefy two post lift for the Vanagon, but a $2000 four > poster would work just fine, and can be drop shipped to your driveway and > assembled by two people. Two post lifts really require professional > installation to be safe. > > The older you get, the more you will appreciate a lift! Unfortunately, I > ran out of money just building the garage. > > Stuart > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of > adam butler > Sent: Tuesday, March 17, 2015 8:42 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: Shop building > > what are rotary lifts and how do I find one, are they available used? > > Adam, from the list >> On Mar 17, 2015, at 7:49 AM, Mark Dearing <vwbrain@AOL.COM> wrote: >> >> I agree but get a good one, I have 2 rotary lifts that are great later > md >> >> >> -----Original Message----- >> From: TJ Hemrick <x53gunner@GMAIL.COM> >> To: vanagon <vanagon@GERRY.VANAGON.COM> >> Sent: Mon, Mar 16, 2015 6:02 pm >> Subject: Shop building >> >> >> Karl, >> I see your caveat on the lift "unless you plan to work under the >> vehicle a lot." and I humbly disagree. While we could make a list of >> all the work you could do while the vehicle is on the ground, the >> lions share of maintenance and trouble seems to be from the knees down >> and wheels in IMHO. >> After a mulitude of vehicles and car issues, a lift is *first* on my >> list. >> >> TJ >> >> >> Date: Mon, 16 Mar 2015 01:25:41 -0400 >> From: Karl >> Mullendore <tdiguru@WESTYVENTURES.COM> >> Subject: Re: Building a Shop >> >> As I >> start filling up my 'new' 30x40x14.5' ceiling, in central Oregon, I >> can honestly say it's the bare minimum size to work in and have >> anything resembling a real shop filled partially w/equipment. I'm >> putting in a 8' >> high storage loft on one end, 4x24 overall, with office, full bath, >> washer/dryer below. A lift isn't a big deal unless you plan to work >> under the vehicle a lot. Good lights (I installed 6 twin-8'-tube LEDs, >> 12K-lumens each fixture), radiant heat source (or floor), and tons of >> outlets seem of high importance. >> Karl >> westyventures.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.