Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2015, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 15 Mar 2015 18:12:56 -0500
Reply-To:     Adam Butler <acbutler.dandy@ICLOUD.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Adam Butler <acbutler.dandy@ICLOUD.COM>
Subject:      Re: Building a Shop
Comments: To: Jason <uberhare@gmail.com>
In-Reply-To:  <CAGydU8S=aW+eu7jcPWOofeNz8X+Re_hLUiROkEgvBYvbWP_qVQ@mail.gmail.com>
Content-Type: text/plain; charset=utf-8

These are all really great ideas, I am going to compose and I'll be in touch.

Sent from my iPad

> On Mar 15, 2015, at 17:42, Jason <uberhare@gmail.com> wrote: > > My shop is 25x40 with 12ft ceiling, and it's not nearly big enough! If you plan to install a hoist, better go with 14ft ceilings. I can't raise the van all the way up work underneath it. Normal cars is OK though. Most hoists need min. 145 inches too....found that out and had to modify mine slightly. You also need 6 inches of concrete to install the lags. I have room for 2 cars (10x10 door) and one side has a mezzanine for storage. The LT31 just clears the door to get inside, but I can't even lift it up to remove the wheels. Compressor is great to have - build a room around it for noise. I'm going to move mine into the washroom to prevent visitors from stinking up the place! :) Oh yes- running water is great for cleanup too. My wife enjoys the fact I can de-grease before touching anything inside the house. > > Jason > > >> On Sun, Mar 15, 2015 at 1:04 PM, adam butler <acbutler.dandy@icloud.com> wrote: >> So heres the plan… >> >> I am building a workspace for my new additions, VW #14 & #15 a early Vanagon Rivera, and an older beetle. >> >> In building my space, I am pouring a foundation 30x24, a 10x10 garage door, side entry door and 12 foot roof. >> >> I have a budget, and am shopping for tools, what would you put in your shop, besides a battery impact or ratchet? >> >> adam Butler >> Florence, TX>Close to Austin >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.