Date:         Wed, 25 Mar 2015 13:12:51 -0400
Reply-To:     Michael <mbucchino@CHARTER.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Michael <mbucchino@CHARTER.NET>
Subject:      Re: . Torque wrenches
Comments: To: Kent Christensen <lkchris@OSOGRANDE.COM>
In-Reply-To:  <008d01d06712$cfe55590$6fb000b0$@osogrande.com>
Content-Type: text/plain; charset=us-ascii

Even if you use any other clicker torque wrench to loosen a fastener, it doesn't hurt it in any way.

Sent from my iPhone

> On Mar 25, 2015, at 11:46, Kent Christensen <lkchris@OSOGRANDE.COM> wrote:

> 
> Re:  When it comes to using torque wrenches there are a number of factors
> that need to be considered for successful use ...  (Dennis)
> 
> 
> 
> Dennis, you've repeated the old-time "legends" regarding torque wrenches.
> 
> If you have a modern German Stahlwille torque wrench--the kind available
> through the VW and Mercedes parts systems-- the following DO NOT apply.
> 
> 1.  You may freely use your Stahlwille clicker torque wrench for loosening

> fasteners, as the torque measuring action only occurs in one direction.
> Should you encounter left-handed threads, you simply remove the detachable

> ratchet head and turn it around.
> 
> 2.  There is NO need to reset the Stahlwille clicker wrench to zero when
> storing it.
> 
> Just like just about everything else, the Germans do torque wrenches better.
> And you pay for it, of course.
> 
> Kent Christensen
> Albuquerque
> '81 Vanagon
> '01 Porsche Boxster
> '07 Merc GL320CDI
> 3 BMW motorcycles