Date:         Sun, 29 Mar 2015 18:54:41 -0400
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: 1.9 water pump replacement question
Comments: To: Stuart MacMillan <stuartmacm@GMAIL.COM>
In-Reply-To:  <003b01d06a47$8a269130$9e73b390$@gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

From the factory they were special. This is a molded hose designed to be
clamped. Cut hoses do not clamp properly throughout their length.  Going
cheap may get you the fun of dealing with them before the next water pump.
Try a local NAPA. The better ones can get most of the IMC stuff and while
may cost a little more you won’t have the shipping. Also note VW also went
to the spring clamps on these hoses also. 

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Stuart MacMillan
Sent: Sunday, March 29, 2015 1:41 PM
To: vanagon@GERRY.VANAGON.COM
Subject: 1.9 water pump replacement question

I’ve always replaced the two short hoses connecting to the water pump when
replacing the pump, but I can only find them from Van Café for $11 each.
$50+ with shipping for about 6” of hose seems excessive.  Is there something
special about these, or can I find hose at NAPA that will work?  One of them
gets a lot of exhaust heat.

 

Stuart