VANAGON archives -- April 2015, week 1 (#190)

Date:         Sun, 5 Apr 2015 08:41:53 -0400
Reply-To:     Eric Ley <eric_ley@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Eric Ley <eric_ley@HOTMAIL.COM>
Subject:      Re: Zero valve settings
In-Reply-To:  <F462B85D3DEA4266B71253671BC74068@ZoltanHP>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
              reply-type=original

Bent pushrod or bad lifters

Eric Ley
Garage Mechanic ELM
2001 Demers Saint-Antoine-Abbé, Qc
1985 Whitey VW 2.1 Man
1985 Goldilocks subi power Auto

--------------------------------------------------
From: "thewestyman" <zolo@FOXINTERNET.NET>
Sent: Saturday, April 04, 2015 11:02 PM
To: <vanagon@GERRY.VANAGON.COM>
Subject:      Zero valve settings

> Hello to the List,
>
> I had to set my valves with zero turn onto the lifters, because they kept
> on coming back with no compression until.
> So, the normal one or two full turn would not work this time.
> What would be the reason?
> Anyone?
>
> Zoltan
>

Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.