Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (April 2015, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 11 Apr 2015 18:24:24 -0400
Reply-To:     Jason <uberhare@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jason <uberhare@GMAIL.COM>
Subject:      Re: Post winter storage sticky valve noise
In-Reply-To:  <CA+az7_6_TgOqousvUQ+njg4_Xc_dJ-0v-Bg+fT5Rpf3j_2gnyg@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

My last waterboxer always took 20-30 minutes of highway driving to pump up a few lifters after sitting for a few months. Sounded pretty terrible until it did...

Jason

On Sat, Apr 11, 2015 at 1:26 PM, John Rodgers <jrodgers113@gmail.com> wrote:

> This is the infamous Vanagon Lifter Syndrome. For whatever reason, > virtually all the WBX lifters bleed down one time or another after sitting > a while, and sometimes from one stop to the next. They rattle until they > pump up again. Harmless enough. Just drive the thing a half hour or so or > some distance until they pump up. The noise goes away! > > John > On Apr 11, 2015 11:52 AM, "Richard Smith" <richard_smith@gnwc.ca> wrote: > > > Mine developed this noise, too, after a long storage the winter before > > last. It would *sometimes* go away if I got the engine warmed up > > completely and then shut it down for 20-30 minutes. A more experienced > > engine person than me attributed this to different metals all getting to > > the same temperature and then cooling together. > > > > I was assured by the mechanic that it wasn¹t harmful (the noise is valve > > ³lifters² not the valves themselves), and lived with it for quite a > while. > > During a recent major tuneup and oil change, the mechanic added some > > Automatic Transmission Fluid to the engine oil and let the engine idle > for > > an hour (!). Then he drained the oil and replaced it. The noise has > > (almost) completely gone away. > > > > You may find that your noise goes away by itself after driving it for a > > few days. I would certainly try that first before doing any more serious > > things. And the Automatic Transmission Fluid ³fix² may or may not have > > been a real thing, but it cost next to nothing and seems to have worked > > for me. > > > > The best way to keep it away is to drive it regularly, if find. > > > > > > > > On 2015-04-11, 9:01 AM, "Stuart Fedak" <ve3smf@YAHOO.COM> wrote: > > > > >I just picked up my 1986 Vanagon Westfalia GL 2.1 from storage, where it > > >has been for the past six months. The engine started up fine, but it > now > > >has a sticky valve type sound on the driver side of the engine. This > > >noise was not there last fall when the Vanagon was put into storage. > > > > > >Is this something that has to be corrected right away, or is this > > >something that will go away with time? What could cause this noise from > > >happening, right after longer term storage? > > > > > >Your thoughts? > > >Stuart > > >Ottawa, ON > > > > > >Sent from my electronic umbilicus > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.