Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (April 2015, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:   Sun, 19 Apr 2015 11:31:37 -0400
Reply-To:   Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:   Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:   Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:   Re: Pinhole in propane regulator
Comments:   To: Rick Cooper <rickdcooper@GMAIL.COM>
In-Reply-To:   <CAG12ait3kf3_CVmqUCYKZLs5oK2z-5=3E3=UFdyoagUHik1L6A@mail.gmail.com>
Content-Type:   text/plain; charset="utf-8"

Propane leaks need to be taken very seriously. Propane has an extremely wide range of flammability. Regulators are not forever items and should be regularly tested and replaced when needed. Being under the van and somewhat exposed maybe every 5 years or so. Since you could not shut the fuel off you also need the service valve. Unless your tank is really pristine condition consider replacing that also. I had my tank fail almost 3 years ago. Rust blow out while getting filled. Fire department response and everything. Be prepared for documentation after an event like this. Who installed it, when was it last inspected, etc.

Dennis

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Rick Cooper Sent: Friday, April 17, 2015 12:10 PM To: vanagon@GERRY.VANAGON.COM Subject: Pinhole in propane regulator

We took our 'new' 87 Westy camping for the first time last week, but had to cut the trip short because of a propane leak from under the regulator that could not be stopped.

I'd filled up the propane tank just before we left; the attendant found the bleeder valve, opened it while filling and then stopped the fill when gas began coming out of the bleeder. I believe that is the correct approach for a non-auto-stop system.

However, soon after filling, the leak began. It could not be stopped by shutting off the service valve. Over a few days, the leak completely drained the tank. I've now pulled the tank and see that there is a manufactured pinhole under the regulator and this is where the leak was from. Is this some sort of fail-safe relief system in case the tank is over-filled?

Where am I at now? This is a completely stock propane system. Do I need a new regulator? I'm guess I may also need a new service valve since shutting it off neither stopped the leak nor stopped the flow of gas to the stove. And how does one get the service valve off? I've tried with a 14" pipe wrench and a fair amount of oomph, but no go. Do I add 4 feet of steel pipe to the pipe wrench and force it?

Thanks for any advice,

Rick


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.