Date:         Wed, 22 Apr 2015 00:45:15 +0000
Reply-To:     WILLIAM WITZ <pbwitz@SBCGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         WILLIAM WITZ <pbwitz@SBCGLOBAL.NET>
Subject:      False reading from Temp. Gauge
Content-Type: text/plain; charset=UTF-8

Found my problem for my Hi and false temp gauge reading. I guess I should have known that the temp sensor on the block just below the Cylinder Head was feeding the Temp. Gauge not from the Expansion Tank . Pulled off the  connector at the sensor and the Gauge fell to zero. Replaced the sensor, and road tested ,rechecked with IR Gun all is well. Remember this is a inline Tiico. I am a Happy Camper again. 
Bill Witz 84 Westy Tiico

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.