Date:         Wed, 22 Apr 2015 11:06:07 -0700
Reply-To:     Stuart MacMillan <stuartmacm@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stuart MacMillan <stuartmacm@GMAIL.COM>
Subject:      Re: Rear Axle Housing Bolts: Use shallow O2 Socket?
Comments: To: Neil N <musomuso@gmail.com>
In-Reply-To:  <CAB2RwfiRCPS_3irk9EE1j=Cebog8vX8nhjBYJth2xVv0HBNR2g@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

He who dies with the most tools . . .  I think a full set of 02 sockets and crow's feet was about $45 at NAPA when I borrowed it for my failed attempt at removing my 02 sensor.  The shop had to cut it out and weld a new bung. 

Stuart

-----Original Message-----
From: Neil N [mailto:musomuso@gmail.com] 
Sent: Wednesday, April 22, 2015 10:57 AM
To: Stuart MacMillan
Cc: vanagon@gerry.vanagon.com
Subject: Re: Rear Axle Housing Bolts: Use shallow O2 Socket?

Thanks guys.
Right. NAPA or my FLAPS
I equate Snapon with $$ but might be less than a set of
O2 sockets. I'd rather keep the tool on hand.
This rear trailing arm repair stuff is addicting!    ;)

Neil.


On 4/22/15, Stuart MacMillan <stuartmacm@gmail.com> wrote:

> NAPA and probably others loan these tools for free.


-- 
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>