Date: Sun, 3 May 2015 09:27:14 -0700
Reply-To: Don Hanson <dhanson928@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Don Hanson <dhanson928@GMAIL.COM>
Subject: Re: 2.1 WBX Coolant Loss: Searched Compression test results.
In-Reply-To: <BAY405-EAS411A5A56A9486D8D419D44CA0D30@phx.gbl>
Content-Type: text/plain; charset=UTF-8
When I messed up on my first ever coolant change and overheated the inline
motor in my van, causing a headgasket failure....I found the leak by
removing the sparkplugs and putting air pressure into the pressure bottle
of the cooling system...then I took a piece of conduit and listened
carefully at each spark plug hole....found the leak, no problemo....on my
motor's installation you could also look right down into each cylinder and
see coolant pooling on the piston top....
On Sun, May 3, 2015 at 7:16 AM, Dennis Haynes <d23haynes57@hotmail.com>
wrote:
> Those numbers for the front cylinders are worth noting. May even be sign
> of a worn cam shaft. However, a compression test alone is often a waste of
> time. Combined with a leak down test you would know if you have a valve or
> ring problem. Then as for looking for internal leaks you secure the engine,
> bypass the gauge and put full shop pressure into each cylinder. If coolant
> suddenly raises in the tank you know you have a problem and in which
> cylinder. Yes small leaks or those heat and load related may not always be
> apparent this way.
>
> Dennis
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
> Of Neil N
> Sent: Tuesday, April 28, 2015 8:49 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: 2.1 WBX Coolant Loss: Searched
>
> On 4/28/15, Jack Botts <johnnyjewel43@hotmail.com> wrote:
>
> > Could also be the dreaded crack in a head between an intake and
> > exhaust valve.
>
> Thanks. I'll search up on that possibility.
>
> Shameful part is that it's running pretty good.
>
> That river in Egypt (Denial) hopes it's just a leak due to a loose coolant
> hose clamp but....
>
> engine compression test done a while ago by a Vanagon shop showed:
>
> 130 120
> 140 140
>
> I posted results here and was told they were below spec. But since the
> vehicle had decent power and since, IMO, the tech may still have been an
> apprentice, I assumed the compression check may have been done incorrectly.
>
> Neil.
>
>
>
>
> --
> Neil n
>
> Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>
>
> 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>
>
> 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>
>
> Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>
>
|