At 09:50 PM 5/9/2015, Dick Wong wrote: >connector is a two position with different spacing compared to the 3 >terminal switch. I was also wondering if anyone has disassembled the >terminals from the two position connector and just inserted each contact on >to the 3 terminal switch and if so which wire to which terminal? Best to retain a connector shell if you can, but mostly for when it's not plugged in. If you can find a shell that has the right configuration and takes Fast-on terminals you can transfer them over. Ask Van-Cafe what they do. If necessary (and possible) just pull one terminal and zip-tie it to the other so it's plain they're meant to be together. The switch doesn't care which wire goes to which terminal. Yrs, d |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.