Date:         Mon, 11 May 2015 19:35:36 -0400
Reply-To:     Dennis Haynes <d23haynes57@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <d23haynes57@HOTMAIL.COM>
Subject:      Re: So close to getting my Behr AC going
Comments: To: Michael McSwain <michaelmcswain@GMAIL.COM>
In-Reply-To:  <CAE_mVa0Aj_-C2=G1Aop0of7mrchejyKeF926LFTSveoU6q8e4Q@mail.gmail.com>
Content-Type: text/plain; charset="us-ascii"

How do you plan to get those hoses onto that compressor? The 90 degree ends
remind me of the air cooled units with the York compressor. Get the straight
connectors with the charging ports included. A good hose shop should be able
to get fittings that can be installed in place. Somehow those hoses look
like they may have served their time. Another option is to get in line tees
with the service ports.

Dennis


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Michael McSwain
Sent: Monday, May 11, 2015 5:26 PM
To: vanagon@GERRY.VANAGON.COM
Subject: So close to getting my Behr AC going

I'm really close to having this thing put back together, but I think I'm
missing one more part.  If anybody out there could help me out I would be
eternally grateful!

I've replaced my O-Rings, my dryer and my compressor.  I'm ready to hook
everything up and take it to pull vacuum and charge it, but I don't see how
or where they will be able to tap into the system to charge it.  My system
is not stock. The two hoses in my engine compartment end with a
threaded/flared connection that would happily screw right onto my new
compressor. Only problem is that there is no one way valve to hook up to the
refrigerant machine.

Here's what I have:
https://lh3.googleusercontent.com/-oX2LsNl_v9c/VVEYkZRdyZI/AAAAAAAALzo/CMKGb
GGP3-k/w362-h644-no/20150511_163429.jpg

And here's what I'm guessing I should have:
http://images.thesamba.com/vw/gallery/pix/1207842.jpg

Anybody know if there's some kind of adapter that would screw in between my
threaded hose ends and the compressor that would have this valve on it?


--
m.