Date:         Wed, 20 May 2015 07:31:12 -0400
Reply-To:     William Monk <billmonk@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         William Monk <billmonk@GMAIL.COM>
Subject:      Re: Strongbox center console
Comments: To: Jeffrey Vickers <jeffrey@vickersdesign.com>
In-Reply-To:  <F0092590-1C6E-48B4-BB76-48AED44C0C05@vickersdesign.com>
Content-Type: text/plain; charset=UTF-8

I have the underseat drawers in my van on both sides. It doesn't interfere
with the batteries. They are shallow though and some objects don't fit. A
bottle of 90 day supply meds don't fit.
They hold my wallet,papers,money etc..
Very secure. Not perfect but work well.

Bill
On May 19, 2015 5:10 PM, "Jeffrey Vickers" <jeffrey@vickersdesign.com>
wrote:

> Good point!
>
> > On May 19, 2015, at 12:24 PM, Abel Longoria <houstonphotog@gmail.com>
> wrote:
> >
> > I have all of my Aux battery components and chargers etc under my
> drivers seat.
> >
> > We just won a passenger seat drawer from RMW at Syncrofest and the lady
> plans to use it for passports, her wallet, and such.
> >
> > Plus I think while camping we're always on the passenger side hanging
> out etc so that passenger side drawer is easier to access if we need to
> grab something from it or stow something away vs the driver's side drawer.
> >
> > Abel Longoria
> >
> >> On May 19, 2015 2:16 PM, "Jeffrey Vickers" <jeffrey@vickersdesign.com>
> wrote:
> >> Why would you want one on the passenger side vs. the driver’s side?
> Much easier to get to the driver’s side since you’re already sitting there…
> >>
> >>
> >> > On May 19, 2015, at 11:51 AM, Automatic digest processor <
> LISTSERV@GERRY.VANAGON.COM> wrote:
> >> >
> >> > Date:    Tue, 19 May 2015 10:39:17 -0700
> >> > From:    Stuart MacMillan <stuartmacm@GMAIL.COM>
> >> > Subject: Re: Strongbox center console
> >> >
> >> > The battery box is sealed and vented, so that's why it's blocked
> off.  =
> >> > You would need to remove the battery to get at it, so it's really not
> =
> >> > practical.
> >> >
> >> > Stuart
> >> >
> >> > -----Original Message-----
> >> > From: Marc Perdue [mailto:mcperdue@gmail.com]=20
> >> > Sent: Tuesday, May 19, 2015 10:21 AM
> >> > To: Stuart MacMillan
> >> > Cc: vanagon@gerry.vanagon.com
> >> > Subject: Re: Strongbox center console
> >> >
> >> > Yeah, the installation instructions have a template that you need to
> use =
> >> > to cut the sheet metal prior to install:
> >> >
> http://www.rockymountainwesty.com/v/vspfiles/assets/images/drawertemplate=
> >> > .pdf
> >> >
> >> > Marc
>