At 05:38 PM 6/3/2015, OlRivrRat wrote: > Certainly ~ But ~ If that whole "Stack" is > AssembledProperly, ThereShouldNotBe AnyMovement between Any of the > MatingSurfaces that exist within that Stack ~ Of course. If there's no movement there will be no wear. Short of magic or active chemical or biological** processes it's not going to change a lot. If it were compressed to the edge of yield strength then axial pressure on the wheels could tend to collapse it; but I doubt that's the case. I am presently fascinated by the ligamentous process that suspends a tooth in its socket. In addition to its other functions, if subjected to steady axial pressure it will remove bone from one side of the socket and replace it on the other side until that pressure is relieved. Which is of course what braces and orthodontic headgear are all about, but it's more remarkable to me as process than as magic. Yours, David |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.