Date:         Mon, 1 Jun 2015 14:53:49 -0400
Reply-To:     Tom Buese <tantonbz@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Tom Buese <tantonbz@GMAIL.COM>
Subject:      Fried wiring harness from dash to 84 Westy camper relay
Content-Type: text/plain; charset=UTF-8

No good deed goes unpunished. Short version of  Ooops, melted the power
wires in the harness that goes from the main fuse panel along the floor
into the auxiliary battery box.  I am trying to leave on Wed. for Bus
Fusion, & wonder if I just leave this harness out until I can get a
replacement, install new aux. battery, etc.  I figure I won't have any
camper lites, water, fridge, etc for the trip, but it is better than not
going?  I should still have all other electrical off of the starting
battery, which is more important to moi.
I know I could make a harness from looking at the simple one I had to
dismantle 1/2 of the driver's side area, but w/ other lighting relays, etc.
there is a bunch of non stock wiring in there that I don't have time to
make sure everything is wired kosher.
Am I out of my mind?

YMMV,

Mr. BZ

--
Tom Buese