Date:         Tue, 9 Jun 2015 21:58:24 -0700
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: Fuel injector test results
Comments: To: Dennis Haynes <d23haynes57@hotmail.com>
In-Reply-To:  <BAY405-EAS106B9D38FED0402E53F2B61A0BF0@phx.gbl>
Content-Type: text/plain; charset=UTF-8

i found these "Made in United States" injectors at Canadian Tire:
image of fuel injector and packaging
http://tinyurl.com/nwr825t
http://tinyurl.com/pqfbyyf
Made in Long Island?!
I can't recall if Marc is located in Canada.

FWIW Marc, I too found blech in the fuel when testing my injectors.
http://tinyurl.com/nnhwfnp
This bus had likely sat for some time.
But then this reminds me. I should check the fuel
expansion tanks. When the grommet fails,
(or one foolishly tries to save the old grommet), all
manner of crap gets in there!
images
https://picasaweb.google.com/musomuso/VanagonGasEVAP


On 6/7/15, Dennis Haynes <d23haynes57@hotmail.com> wrote:

> Speaking of injectors these are becoming more available aftermarket. I just
> purchased a set through NAPA. Part number CRB-218530. List is $60.80. My
> wholesale cost was much much less. The box says "made in USA". Are they?
> They came with the hose and a clamp, no seals.





Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>