|
I've serviced the pressure relief valves in the Diesel oil pimp pick-tube before. You can remove the end cap, the plunger and spring and polish the bore and plunger with a fine crocus cloth , then reassemble with some assembly lube , testing for smoothness of the plunger before putting the cap back on.Robert1982 Westfalia After complete rebuild including new OHC head, rings, bearings, injector rebuild, new oil pump... Now on warming up oil pressure peaks and blows out the big Mann oil filter, spewing out the oil. Something about oil pump check valve or bypass? Does anyone have direct experience with this issue?
-- Frank Lee from Gmail Mobile
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.