The cooler is mounted directly on the transmission. There is no line between them. I believe that some volks have mounted a temp sensor on the bottom of the transmission pan. Larry A.
On Fri, Jun 26, 2015 at 5:23 PM, Todd Last <rubatoguy@comcast.net> wrote: > I'd just put a t-fitting with the temp sender in the line to the > transmission cooler. > > Tod > > ----- Original Message ----- > > From: "John Rodgers" <jrodgers113@GMAIL.COM> > To: vanagon@GERRY.VANAGON.COM > Sent: Friday, June 26, 2015 1:53:21 PM > Subject: Auto tranny cooling > > I would like to install a temp guage to monitor the tranny oil temp but > don't know how to approach this. Has anyone done this ? Can you describe > it or provide a link? > > Thanks, > > John > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.