Stop chasing your tail........ Go back to the basics. If you are using all the formerly running accessories off the old engine. You most likely have an installation problem. Like the "BAD GAS", all four injectors are not going to fail at once. Pull one and see if you have spray. You can buy a can of "volatile" (some are non-flammable) carburetor cleaner or brake cleaner spray, with a "straw" that attaches to the nozzle. Loosen the intake boot, and push the straw under it, spray a little in the intake and give it a spin. I'm with you, stay away from diesel starting fluid. Remember all these cleaners are gas's, and are heaver than air, and will sink to low spots in/on the engine, they puddle until they get a spark and K-POW! I would place a pretty good fan blowing on the engine during this process. Skipper
>Subject: Re: [T2] RAINING IN BALTIMORE |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.