I have to ask why you need something else to get anxiety over? Choices are to drill the pan and use a bulkhead fitting or drill the side of the housing and tap for the 10mm or 1/8-17 pipe thread for the sender chosen. These transmissions rarely give trouble and when they do repairs are not that hard. Overheating is usually a sign of failure or abuse. Dennis -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of John Rodgers Sent: Friday, June 26, 2015 4:53 PM To: vanagon@GERRY.VANAGON.COM Subject: Auto tranny cooling I would like to install a temp guage to monitor the tranny oil temp but don't know how to approach this. Has anyone done this ? Can you describe it or provide a link? Thanks, John |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.