Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2015, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 26 Jun 2015 14:49:43 -0700
Reply-To:     Stuart MacMillan <stuartmacm@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stuart MacMillan <stuartmacm@GMAIL.COM>
Subject:      Re: Since is Friday: Can I ask a question about....
Comments: To: T Collins <tonycollin@GMAIL.COM>
In-Reply-To:  <CAAzKkH8Jb4ixquaydGVCXVM+gtnR9-Zb9E26d_xvf2rHHEVAhg@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Fan has to have power to the box it's mounted to, and two wires from the switch on the wall to that same box. Then you can split two legs off the power to the box, one to the fan motor and the other to the switch, and back to the fan light. If power goes to the switch box, you need three wires from the box to the fan mounting box, i.e. 14/3. Neutral, hot, and switched.

Fan will need to be built with three wires up the shaft, one white (neutral) and two for powering the fan and light. And there will likely be a ground wire to.

Stuart

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of T Collins Sent: Friday, June 26, 2015 11:12 AM To: vanagon@GERRY.VANAGON.COM Subject: Since is Friday: Can I ask a question about....

Can I ask a question about installing a room ceiling fan to this forum? We are having issues with explaining ourselves to the contractor.

Here is the deal I need a hand with a remodeling issue.

We need to wire a new fan in my daughters bedroom. I would like the fan to be control by the pull chain only (at the fan) and the lights on the fan to be control by a switch ​/​ dimmer. Do any of you electrical or DIY types have a diagram ​ (or link)​ that represents what I am writing?

1 fan variable speeds (always hot) control by pull chain. light kit ​ attached to​ fan control ​ed​ by light switch and dimmer.

I appreciate any responses directly to me to not obstruct the system if that is ok with MOds?

Thank you, T


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.