Date:         Fri, 26 Jun 2015 22:18:06 -0700
Reply-To:     Don Hanson <dhanson928@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Don Hanson <dhanson928@GMAIL.COM>
Subject:      Re: Auto tranny cooling
In-Reply-To:  <CA+r=JhrUrbxYCcd+J_7wes8zfzHmDVxLVs2pDK15YTURvEMzjw@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

  Is there a drain plug?   Don't know about auto transmissions in Vanagons.
  I've mounted the sender in the drain plug of transmissions in the
past...You can then simply remove the wire before you drain the tranny
and...you get right into the fluid.  No risk drill shavings in the tranny
when you drill and tap the drain plug to take the temp. sender.

   You may scare yourself when you see the real temps down there....

On Fri, Jun 26, 2015 at 7:18 PM, Larry Alofs <lalofs@gmail.com> wrote:

> The cooler is mounted directly on the transmission.  There is no line
> between them.
>
> I believe that some volks have mounted a temp sensor on the bottom of the
> transmission pan.
>
> Larry A.
>
>
> On Fri, Jun 26, 2015 at 5:23 PM, Todd Last <rubatoguy@comcast.net> wrote:
>
> > I'd just put a t-fitting with the temp sender in the line to the
> > transmission cooler.
> >
> > Tod
> >
> > ----- Original Message -----
> >
> > From: "John Rodgers" <jrodgers113@GMAIL.COM>
> > To: vanagon@GERRY.VANAGON.COM
> > Sent: Friday, June 26, 2015 1:53:21 PM
> > Subject: Auto tranny cooling
> >
> > I would like to install a temp guage to monitor the tranny oil temp but
> > don't know how to approach this.  Has anyone done this ? Can you describe
> > it or provide a link?
> >
> > Thanks,
> >
> > John
> >
>