Date:         Mon, 6 Jul 2015 19:31:56 -0700
Reply-To:     Stuart MacMillan <stuartmacm@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stuart MacMillan <stuartmacm@GMAIL.COM>
Subject:      Size of shortened hex key for replacing H20 pump on a 1.9?
Content-Type: text/plain; charset="us-ascii"

I made one of these about 20 years ago and now can't find it.  It's for the
cap screws that are too close to the exhaust pipe for even the short arm,
and I'd like to make one before I start the job.



I know somebody out there has one!



Thanks!



Stuart

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.