|
I could be wrong but I don't think you need to bleed the system. I replaced twice (2 vans) that same sensor... unless the coolant is very empty... and even that... once I even had the big coolant hose loose and lost a big amount of coolant...(the one on passenger side that goes to the radiator)... I just put it back, tighten the clamps top up with coolant and go. just be sure, check the level on the big coolant bottle frequently and that's it... you could order overnight shipping for the part and replace yourself and drive away |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.