At 02:41 PM 7/13/2015, Neil N wrote: >Are there not benefits to using the Shoe Box gizmo to test various >parts while the vehicle is being driven? (engine under load, or not, >etc.) It's a wonderful thing to have, it tells you in seconds what would take several minutes to check individually. Saying it's no better than a Digitool is the same as saying it's no better than Great! My only caveat is that running all that wire up front means there's some possibility of RF pickup. Darrell's had the cable wound through a ferrite choke at the ECU end. I don't know whether the new ones do that but it's a good idea, as is making them detachable in case of a problem.
>Neil. Who may never develop the skills to solder a DB25 connector to >ECU but would like to try! It's not micro-soldering by any means. Easy for some, hard for others, depends on how comfortable you are with small work. My shaky hands are a big nuisance for this stuff, but I manage. Cleancleanclean! Clean the soldering tip the moment before use, but don't clean after so that the solder on the tip can oxidize instead of the tip. Apply a tiny bit of solder to the tip for contact, but only ever feed solder into the heated joint, not the iron. Get a flux pen. Use 63/37 rosin core solder if possible, 60/40 otherwise. 50/50 is out, and modern lead-free solders are a can of highly specialized worms. Silver-bearing solder meant for surface-mount work is probably ok here (it's needed for long-term reliability of surface-mount componentry). Desoldering braid and small aluminum solder-suckers are your friends, as are 15-25 watt fine-tip irons. The crucial thing to remember about PC boards is that the copper foil is glued onto the board, and at soldering temps the glue is very fragile. If you scrub your iron or braid on a pad it will detach from the board, leading to rapidly learning how to repair PC boards. Show your ECU to yhour local TV repair guy, ask for something comparable to practice on. Yrs, d
>On 7/13/15, David Beierl <dbeierl@attglobal.net> wrote: > > > ..... As Darrel said, it > > doesn't do anything you can't do with a voltmeter > > and a couple of needles to pierce insulation. > >-- >Neil n > >Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca> > >1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy> > >1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/> > >Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.